HOME | 110 | 112 | 121 | 130 | 131 | 132 | 140 | 150 | 165 | 172 | 173 | 174 | 180 | 181 | 182 | 184 | 190 | 191J

Roland 100m Modular Synthesiser

Roland 100m Modules
110	VCO/VCF/VCA
111*	VCO/VCF
112	Dual VCO
120*	VCF/VCA
121	Dual VCF
130	Dual VCA
131	Output mixer/oscillator/Headphone Amp
132	Dual CV/Audio Mixer & Voltage Processor
140	Dual EG & LFO
141*	Dual Envelope/Gate Delay/Inverter-Adder
150	Ring Mod/Noise/S&H/LFO
160*	Computer Interface
165	Dual Portamento Controller
170*	Pitch to Voltage converter/Env. Follower/Amp
172	Audio Delay/Phaser/LFO/Gate Delay
173	Signal Gate & Multiple Jacks
174	Parametric EQ
180	32-key Controller Keyboard
181	49-key Controller Keyboard
182	Analogue Sequencer
184	4-note Polyphonic Keyboard
190	Three-Module Rack
191J	Five-Module Rack
	*Believed to have been prototypes only

This voltage controlled synthesizer is a musical instrument which contains elements that can be connected together, much like building blocks to build or create almost any sound imaginable. As with most professional systems, the System lOOM puts these synthesizer elements into separate modules so that you can build a system which meets your own particular needs. All major control and audio inputs for each module have their own input mixers which greatly simplifies patches where multiple inputs are needed. This also means that all patch cord signal levels are high for a much better signal-tonoise ratio. All module inputs and outputs are compatible so that any output may be connected with any other and with most equipment found in the recording studio. Keyboard control voltage, gate and trigger are internally connected so that normally patch cords are not needed for these.

A Flexible System for Today’s Creative Musician The System 100m is sold as separate units so that you can build up a system to match your own particular needs. The keyboards include 6-conductor cords for power, internal CV, GATE, and TRIGGER connections to the system. The racks (190 and 191) contain the power supply, power switch, and voltage regulators for the modules and keyboard. Module mounting screws and a patch cord set (PCS-2) are included.

All modules are 104(W) x 230(H) x 200CD)mm, 1.6kg.

Tech Specs

100m modules are 230mm high by 104mm wide.
Modules require +/- 15v and 22v DC power supply.
Patch connections are 3.5mm mono phone jack.
Rear module power (& control) connections are 8-pin DIN. Details here.
Inter-rack (rear) and & keyboard (front) connections are 6-pin DIN. Details here.